Wood Beam LED Pendant Light No.3 | Remote Control Dimmer | Linear Lighting

This Wood Beam LED Pendant Light is a slimline, old-worldly composition of timber and steel contrasted with the clean modern look of embedded LEDs.

The steel saddles on our pendant feature a gentle gothic-style arc and complement the fine lines of the timber. All of the steel components are treated with black oxide and oil and then buffed matte to provide a beautifully antiqued and aged finish that is dry to the touch.

The solid Blackbutt timber body is left natural to showcase the beautiful grain. After sanding, it’s treated with Danish oil, and a light coat of wax is applied and polished. We have added our trademark old-style boilerplate to complete the authentic vintage industrial look and feel.

A single central Little Anvil custom adaptable box ceiling canopy is provided to tether this linear pendant LED to the ceiling via chain and S hooks. Not only does this act as a suspension point, but also houses the driver and controller for the RF remote, making installation easy and hiding unsightly modern electrics in a traditional-looking housing. The canopy is compatible with UL-style junction boxes but does not come with a UL listing.

This light is perfectly suited for use in a multitude of environments. Due to the quality of light provided and the warm tones of the wood, this would be ideal over a dining table, a bar counter, a food service area, a billiards or snooker table, passageway lighting, or could be used in any environment that requires an authentic vintage look. It may also be suitable for use in areas where glass bulbs are not permitted and shatterproof requirements are in place.

This light comes with an overall drop height of 1500mm that can be adjusted shorter via the chain links. It can also be increased by using the options provided.

It comes wired and ready to install by your electrician and is supplied with a remote control dimmer that can be configured to control one or many beam lights. This is especially useful when the installation of new dimming wiring is difficult or costly. All required lighting components come with either SAA, RCM for Australia and New Zealand, CE for Europe, or UL listing for the US and Canada.

WE ARE SCALING BACK OUR ETSY STORE TO CONCENTRATE ON OUR WEBSITE. FIND OUR FULL RANGE AT LITTLEANVIL.COM

Please note this product is usually made to order. We endeavor to ship within 2 weeks after purchase but it may take up to 3 during busy periods. If delivery time is crucial to your project please contact us prior to ordering and we will do our best to meet your needs.

Features:
Custom fabricated steel components.
Unique design.
Choice of fabric cable.
Custom boilerplate.

Installation Document: https://tinyurl.com/yb7w8yv6

Specifications:
Indoor use only.
Input Voltage: 240VAC (eg. AUS, UK, NZ) or 120VAC (eg. US, CA).
Rated Wattage: 25W
LED Driver Wattage: 40W
LED: SMD strip. 12V -24V 30,000Hrs
Light Output: 2200lm
Colour Temperature: Optional
Colour Rendition Index: >92
Natural White - 4000k
Warm White - 3000k
Dimmable: Yes, with supplied remote control.
Warranty: 2 years from the date of purchase.

Remote Control Specification:
Output - RF (Radio Frequency)
Operating frequency - 868mhz
Control distance - Greater than 15 metres.
Battery - Lithium-ion 3V (1 x CR2025)

Dimensions:
Width: 1180mm
Drop Height: 1500mm Standard
Weight: Approximately 12kgs (26.5lbs)

If our shipping quote seems incorrect, please contact us so we can try to accurately give you a figure based on your order quantity and location. Shipping within Australia varies greatly so the quote on our products is an average and may differ (higher or lower) based on your state. If you are an international purchaser and your country is not specified, please contact us and we will do our best to get you a price asap. International buyers: please be aware that you may be subject to import duties/taxes in your country.